Lighting up your SJBLZD-LED Snow Broom is quick and easy.
- First, using a large coin or a flat-head screwdriver, gently unscrew and remove the battery compartment cover from the snow broom by turning the cover counter-clockwise. Once completely loosened, you may need to use the tip of the screwdriver to pry the cover off and out of the socket.
- Install your 2x AAA batteries, noting the proper direction of each battery against the battery terminals.
- Finally, replace the battery compartment cover. The best way to ensure a proper fitting is to lay the cover into the socket, and turn the cover counter-clockwise several times until it lays completely flush into the unit. Then begin to tighten the cover by turning it clockwise with your coin or screwdriver, ensuring a snug fit.
That's it! You can now use the power switch to illuminate your clearing path, or send out a flashing signal in the event of emergency.