How do I disassemble my Hedger Joe HJ605CC?

To disassemble the HJ605CC, you will need a S14 socket wrench or a pair of pliers as well as a Phillips head screwdriver. Then proceed with the following instructions;

• Unscrew the nut on the cam-lock and remove the bolt (Fig. 1)

• Next, remove the remaining screws on the telescopic lock, and remove one side only of the telescopic lock housing (Fig. 2)

• Open the telescopic lock assembly, move the ratchet locking mechanism to the side, and separate the lower pole from the telescopic lock (Fig. 3)

• Close the telescoping lock assembly housing, replace the screws and cam-lock bolt, and tighten (Fig. 4)